Free nbn fibre upgrade: can I get FTTP, and what are the conditions?
6 min read · Updated Nov 2026
Selected homes on nbn FTTN (node) and FTTC (curb) can upgrade to full fibre. Here's who qualifies, the plan and minimum-term conditions that usually come with it, what the install visit involves, what happens to your old connection, and what isn't covered.
1
Can I get the fibre upgrade?
Only homes and businesses on FTTN (fibre to the node) or FTTC (fibre to the curb) can be offered it, and only at addresses nbn has selected. It isn't automatic for everyone on those types. nbn also requires the premises to be classed as a simple one, and not all homes in an eligible area qualify. In January 2025 nbn announced it would offer the remaining FTTN homes an upgrade path, with more than 95 per cent of around 622,000 premises expected to get the option of full fibre. nbn says the work should finish by the end of 2030. If your address isn't eligible yet, it may become so before then.
Is it really free? The conditions that come with it
nbn doesn't charge for installing its own equipment, but there are strings attached. You have to order a plan on one of the faster speed tiers nbn sets for the program, and that can mean a faster, dearer plan than the one you're on now. You'll usually also need to keep that plan active for a minimum period, often 12 months. Move to a slower plan or disconnect before then and charges can apply, because nbn can pass upgrade costs on to providers. A new router, extra cabling, or your own conduit (if the box can't go where you want it) is also on you. Before you order, we'll spell out which plan you'd need, how long you'd need to keep it, and what it would cost to change your mind.
3
How do I check my address?
nbn's address checker on its fibre upgrade page shows one of a few results: fibre is available now, it's coming, or the program can't upgrade you. If it says coming, you can register with nbn for updates. Or skip the checker and send us your address. We look it up, tell you your current connection type, and say whether an upgrade is open to you.
An nbn technician runs a new fibre cable from the street to your home. They use an existing conduit where possible, and where they can't, they may surface-mount or shallow-bury the cable at least 150 mm deep inside your boundary, with the owner's consent. On the wall they may add an outdoor utility box, and inside they fit the nbn connection box. Plan on 2 to 4 hours, possibly longer, with an adult over 18 there to sign off on where equipment goes. Power and internet may drop for 30 to 60 minutes.
nbn's guidelines put the connection box within 1.2 metres of a power point, usually within 12 metres of where the fibre enters, in a cool, dry, ventilated spot. That rules out bathrooms, laundries, kitchen wet areas, and under opening windows. In a multi-storey home it goes on the ground floor, and usually not in a garage or bedroom unless you ask or there's no other option. Tell the technician where your router will live. A short ethernet cable from the box is the easy fix.
6
I rent or live in a strata complex. Can I still upgrade?
Renters need the landlord's permission first, because installs involve drilling and sometimes digging. Townhouses, units and other shared-title properties are handled differently. nbn runs a separate program for whole buildings and complexes on FTTN or FTTC, where the body corporate, owners committee or building owner applies for everyone. nbn lists a co-contribution of $275 including GST per unit (and per common-area service), paid jointly by the owners' representative body. A single unit owner or tenant can't opt in alone.
nbn installs the fibre alongside your old connection, so you keep your current service until the new one is active. Your provider then switches you over. Make sure the old plan is cancelled so you aren't billed for both. If you keep it, nbn says it will give providers at least 18 months' notice before it turns the old technology off. Most routers with an ethernet WAN port will work on FTTP, but nbn suggests Wi-Fi 6 or newer for faster tiers. VDSL-only modems used on FTTN won't. Once you're connected, you can return the old nbn box free through Australia Post.
Fibre wall outlet connects by Fibre lead — don’t kink it into the nbn connection box's Optical, then Ethernet cable (RJ45) from the UNI-D 1 to Your Wi-Fi router.
What doesn't this program cover, and how do we help?
The home program covers FTTN and FTTC only. HFC is out because it already supports the faster tiers, and FTTB apartments usually need a building-wide upgrade. Opticomm is a separate network from nbn, so these upgrades don't apply to it. We check your address, confirm your connection type, tell you whether an upgrade is open, which of our plans qualify and how long you'd need to keep one, then place and follow the order with you. If it isn't available, we'll say so and look at the best option for your address instead.