nbn FTTB explained: fibre to the building (or basement)
5 min read · Updated Oct 2026
FTTB is how most apartment buildings connect to nbn: fibre to the building's comms room, then the existing phone wiring to your unit. Here's how it works, the speeds it supports, the modem you need, and what to do when it drops out.
1
What is FTTB?
FTTB stands for Fibre to the Building. It's sometimes called fibre to the basement, because nbn runs fibre to a secure cabinet in the building's communications room, which is often in the basement. From there, the building's existing phone wiring carries the signal up to each apartment. nbn uses it mainly for apartment blocks and similar buildings.
FTTB works like FTTN (Fibre to the Node), except the node sits inside your building rather than in a street cabinet. Because the copper run from the comms room to your unit is short, speeds are usually steadier than FTTN. The trade-off is the same speed ceiling as the other copper types: up to the 100/40 tier. Full fibre (FTTP) and cable (HFC) can order 500/50 and faster.
You live in an apartment or unit, there's no nbn box on your wall, and your modem plugs straight into a phone socket. That's FTTB. If there's a white nbn box with a fibre cable, you're on FTTP; a box on a TV-style coax socket is HFC. Or send us your address and we'll look it up for you.
Which wall point the internet comes in on. Fixed Wireless and satellite come in on a cable from the roof instead
4
What modem do I need for FTTB?
A VDSL2 modem-router, the same kind used on FTTN. It plugs into the phone wall socket with a phone cable (RJ11). There's no separate nbn box. A router that only has an ethernet WAN port won't work on its own here. If you're not sure about the modem you have, send us the make and model and we'll check it.
Phone wall socket connects by Phone cable (RJ11) into the Your modem-router's DSL.
FTTB plans go up to the 100/40 tier. The speed you actually get depends on the wiring inside your building, your modem and Wi-Fi, and how busy the network is in the evening. Most FTTB units hold their speed well because the copper run is short. nbn's free fibre upgrade program has so far covered FTTN and FTTC homes rather than FTTB buildings; we'll check whether anything has changed for your building when you order.
Not every apartment building uses nbn. Many newer buildings and estates have a private fibre network such as Opticomm instead. Those usually run fibre into each apartment and can support faster plans than FTTB. The developer picked the network, not you. We connect both nbn and Opticomm, and we'll tell you which one your building has.
Check the phone cable is firm at both the wall socket and the modem's DSL port, and unplug anything else from the other phone sockets in your unit. Restart the modem and wait a few minutes for the DSL light to go solid. Just moved in? Try each phone socket, because only one may be active. If your neighbours are down too, it's probably the building's comms room, for example a power cut there. Let building management and us know.